M-VENUSAUR

M-VENUSAUR

003-M / Mega Venusaur - Pokémon Papercraft
Name: M-Venusaur
Type: Grass/Poison
Species: Seed Pokémon
Height: 2.4 m (7'10")
Weight: 155.5 kg (342.8 lbs)
Interesting Facts: As Mega Venusaur, the flower on its back grows larger and two new, pink flowers bloom, one on its forehead and one on its rear. Additional leaves with woody stems are grown around the flower that are supported by vines that grow from the base of the flower. Mega Venusaur also develops darker patches of color on its forehead below the new bloom. Its legs and frame also become more sturdy to support the weight of the flower.

THE PAPER MODEL
Height: 17.3 cm/ 6.8 in
Width: 19.9 cm/ 7.8 in
Depth: 26.1 cm/ 10.3 in
No. of Pages: 10
Level: Easy/Medium

NOTES:  The model isn't hard, it only has a lot of details to glue. Start at the mouth and build by numbers to the back legs, where you'll close. There's a time to glue each detail, it's indicated by number. It's really important to reinforce the inside of the body, where the tree connects with the body. Further instructions on the template. Be sure to print pages labelled 9 and 11 on the backs of pages 8 and 10 respectively. These are to ensure that white does not show on the under side of the leaves. The shiny front/back flowers will be double sided yellow and pink, but this isn't a problem if you trim back the parts.

Download: A4 / Letter

Read More

PHIONE

PHIONE

489 / Phione - Pokémon Papercraft
Name: Phione
Type: Water
Species: Sea Drifter Pokémon
Height: 0.4 m (1'04")
Weight: 3.1 kg (6.8 lbs)
Interesting Facts: Phione is a blue Pokémon with a round head and a tiny body. Phione's head is crowned by a flotation sac with a long, ribbon-like antenna. Its mouth is small, and its eyes are large with blue sclera and gray irises. Above its eyes are two blue, circular markings connected to the eyes by a thin black line. Its long, flipper-like arms have rounded tips. Phione has a red, oval gem on its chest and a single rudimentary foot spike.

THE PAPER MODEL
Height: 14.6 cm/ 5.7 in
Width: 15.4 cm/ 6.1 in
Depth: 14.0 cm/ 5.5 in
No. of Pages: 3
Level: Easy

NOTES:  The model is pretty easy. Start it at the ponytail and work it down. Close the model at the bottom. Further instructions on the template.

Download: A4 / Letter

Read More

M-LUCARIO

M-LUCARIO

448-M / Mega Lucario - Pokémon Papercraft
Name: M-Lucario
Type: Fighting/Steel
Species: Aura Pokémon
Height: 1.3 m (4'03")
Weight: 57.5 kg (126.8 lbs)
Interesting Facts: As Mega Lucario, its cream fur becomes longer, and its thighs slim down. It develops more spikes on the back of its paws, of which have turned crimson. Its aura-sensing appendages grow longer, and two of them are tipped in crimson. Its shoulders also possess a spike each. Its aura heightens throughout its body, which formed black markings on its blue fur.

THE PAPER MODEL
Height: 30.2 cm/ 11.9 in
Width: 17.3 cm/ 6.8 in
Depth: 17.6 cm/ 6.9 in
No. of Pages: 7
Level: Hard

NOTES:  This model has two main start points: the ears and the spike that goes inside the chest. The head is closed at the spike at the bottom and the body is closed at the bottom of the toes. There is a time to glue everything to it, in a way that the parts won't stay in the way while building, the order indicated by the numbers provides this. Also, there are a lot of lines to be folded on this one, they are indicated by red lines on the pdo, fold them smoothly. The hardest part is the neck fur, take your time there; fold the lines, follow the instructions and the numbers and it will build pretty well. Plenty more info included on the template, along with colored tabs to guide your build, but the use of the pdo is still indicated.

Download: A4 / Letter

Read More

POKEDEX

POKEDEX

Kanto / Pokedex - Pokémon Papercraft
Name: Pokedex
Type: HANDY505

Interesting Facts: In Pokémon Adventures, only a select group of people have Pokédexes and they are highly respected as a result. The Pokédexes come in groups of three per region, and are generally given out along with a starter Pokémon from the region's Professor. Each Pokédex has a holder registration system, meaning when it is assigned, the holder must register his or her name and fingerprints, which means each of the Pokédexes is only allowed to have one rightful owner.

THE PAPER MODEL
Height: 3.7 cm/ 1.5 in
Width: 18.1 cm/ 7.1 in
Depth: 14.5 cm/ 5.7 in
No. of Pages: 3
Level: Medium

NOTES:  The parts for this model are pretty simple to build, joining them is the tricky part. Glue the details before closing the pages, this makes it easier. While gluing the hinge, you MUST follow the number references on the pieces, this ensures the rotation movement will happen just as shown in the video. You can either pick one Pokemon to use or change them, the way to make that happen is explained on the templates, the video also gives a good idea on how it's done.

Download: Pokedex

Read More

DIALGA

DIALGA

483 / Dialga - Pokémon Papercraft
Name: Dialga
Type: Steel/Dragon
Species: Temporal Pokémon
Height: 5.4 m (17'09")
Weight: 683.0 kg (1505.8 lbs)
Interesting Facts: Dialga is a dark blue sauropod-like Pokémon with some gray metallic portions, such as its chestplate, which has a diamond in the center. It also has various light blue stripes. It has a fin-like structure on its back and a crest on its head, resembling a dinosaur. Dialga also has two horns on top of its head, two fang-like horns around its mouth, three spines on the back of its neck, long claws, and a short tail. The wing-like structure on its back can be used to focus the flow of time, as seen in Explorers of Time, Darkness, and Sky. Pokémon Mystery Dungeon: Explorers of Sky: Dialga appears in the main storyline, but mostly as Primal Dialga.

THE PAPER MODEL
Height: 22.3 cm/ 8.8 in
Width: 17.6 cm/ 6.9 in
Depth: 27.9 cm/ 11.0 in
No. of Pages: 9 (10th is optional 2D instead of 3D on page 1)
Level: Medium-Hard

NOTES:  Start the model at the head, close at the tip of the tail. This model has a lot of details to glue on the model, like nails, eyebrows, the chest piece and the so called "fan". It's suggested to glue the details as you go, while you can still apply pressure from the inside. The eyebrows and every diamond shape piece is supposed to be built around the front and closed at the back, where there are no tabs, this is more important for the fan, since the back does not close the piece itself, but instead it's glued on the black details on the back of the fan. After these pieces are glued to the black details, glue the front part to the front of the fan. Further instructions on the template.

Download: A4 / Letter

Read More

PALKIA

PALKIA

484 / Palkia - Pokémon Papercraft
Name: Palkia
Type: Water/Dragon
Species: Spatial Pokémon
Height: 4.2 m (13'09")
Weight: 336.0 kg (740.8 lbs)
Interesting Facts: Palkia appeared in the first three Diamond & Pearl series Pokémon movies. It was first shown in The Rise of Darkrai, where it fought with Dialga and Darkrai in a battle that nearly destroyed Alamos Town. It was shown in a flashback in Giratina and the Sky Warrior. Palkia's final movie appearance was in Arceus and the Jewel of Life. It was shown for the first time with both the other members of its trio, and started a battle with them which awoke Arceus.

THE PAPER MODEL
Height: 22.7 cm/ 8.9 in
Width: 24.0 cm/ 9.4 in
Depth: 27.3 cm/ 10.7 in
No. of Pages: 12
Level: Hard

NOTES:  Start the model at the head. The fold lines for this part are indicated in blue lines, it's necessary to fold them in order to give the head and neck a proper shape. You can either glue the wings when indicated by numbers or after the arms are glued, use a drop of glue on the side they meet the body. The arms are built from the hands up, you must glue the arm plates before going any further, they need pressure from the inside. The shoulders are simple and there are references on where to glue the shoulder plates. Join the arm and the shoulder BEFORE closing the arm. The arm can be rotated and glued on another position besides the one on the picture. The legs are built from the feet up. I recommend reinforcing them from the inside, so as the middle of the body. The model is closed at the tip of the tail. The stripes must be glued BEFORE closing, while you can apply pressure from the inside, if you follow the numbers you'll be able to do so.

Download: A4 / Letter

Read More